All-in-One Terminal is available in Singapore, HongKong.

​
Overview

The HitPay S1F2 is a portable, all-in-one POS terminal with:
  • Built-in card payments
  • Integrated receipt printing
  • Wi-Fi and cellular connectivity support
All-in-One S1F2

​
Steps to get your All-in-One Terminal

  1. Sign up for a HitPay account
  2. Complete your KYC and get approved.
  3. Contact Sales to enable Cards (by Adyen)
  4. In your HitPay Dashboard: Settings > Payment Methods > Select “Turn On” for “Cards (by Adyen)”
  5. Complete onboarding for Cards (by Adyen).
  6. Purchase the terminal
  7. Your terminal will be shipped to you — you’re ready to go!
Questions? Email us at support@hit-pay.com

​
Steps to Set Up

  1. Insert the battery. Use the provided cable to charge via the port with the lightning symbol.
  2. Power on the device (left-side button).
  3. On the Homepage: Settings > Network > Enter passcode 0000 > Wi-Fi > Connect
  4. Leave the terminal on and connected for ~1 hour. The HitPay app will auto-install.
  5. Once installed: Open HitPay App > Log in > Settings > Check Reader Connection > Select “Adyen POS” > Select terminal based on your Serial Number
If the app doesn’t install: Go to Settings > Apps > Enter passcode 0000 to trigger the download.
Please note that you have to use the cable provided in box to charge.

​
Steps to Accept a Payment

To accept payment, follow these steps below :
  1. Complete the setup steps above.
  2. Open the HitPay app and log in.
  3. Enter the amount and tap Charge. (Optional) Add invoice number, remarks, or description.
  4. Choose Card Terminal as the payment method.
  5. Tap, swipe or insert the customer’s card. Wait for success confirmation.

​
Set Up your Printer Settings (Auto/Manual)

  1. Open HitPay app.
  2. Go to Settings > Printer.
  3. Click on the Printer Settings (Gear Icon) on the top right of the page.
  4. Choose to enable/disable the automatic receipt printing by turning on/off the toggle.
  5. If you selected Automatic, select the number of receipts to be printed. If you are printing more than 1 receipt, you can set the time delay between each prints. If you selected Manual, tap “Print” after each transaction.
  6. Once you’ve configured your preferences, click on the “Save” button to apply the changes.
Customize your receipts under Settings > Receipt Customization.
Receipt size has a paper roll diameter of 40mm, and a paper width of 57/58mm.

​
Specifications

FeatureDescription
Device dimensions200 mm L x 78 mm W × 56 mm H / 7.9” L x 3.1” W x 2.2” H
User interface5.5” Touch display
Paper roll diameter40mm
Paper width57/58mm
Weight495G / 1.09lbs
Battery5840mAh (21.3Wh), replaceable
ProcessorQuad-core, 1.3 GHz, ARM Cortex-A7 32-bit RISC processor
Memory16GB flash & 2GB RAM

​
Troubleshooting Wi-Fi Connection

​
Reader is unable to connect

To check connectivity, go to the Device homepage, then select “Settings”, choose “Network”, enter passcode “0000”, choose “Wifi” and connect to your Wi-Fi network.
  • Make sure the Wi-Fi network is connected and has internet access.
  • The signal strength is good.

​
FAQs

  1. What do I do if I get the error “Could not process the payment. Please check the connection.”
Make sure terminal is connected to WiFi (preferably, since there’s connection issue)/Hotspot using a mobile device instead of using the cellular. Go to Settings > Configuration > Update. Passcode is “0000”.
Please contact us support@hit-pay.com if you have any questions.